Menu
Your Cart

SIM800L Mini GPRS GSM Module

Description

This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.

SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world. CityTech BD

First is made of wire (which solders directly to NET pin on PCB) – very useful in narrow places. Second – PCB antenna – with double-sided tape and attached pigtail cable with IPX connector. This one has better performance and allows to put your module inside a metal case – as long the antenna is outside.

Caution: Use a resistor divider circuit before interfacing it with Arduino to avoid the damage to the module. CityTech BD 

SIM800L Pinout

Features :

  1. TTL serial port for serial port, you can link directly to the micro-controller.
  2. Don’t need MAX232.
  3. Power module automatically boots, homing network.
  4. Onboard signal lights all the way.
  5. It flashes slowly when there is a signal, it flashes quickly when there is no signal.

CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD 

-font-b-Antenna-b-font-for-font-b-SIM800

This SIM800L breakout board is ideal for projects that needs to save space. This board draws a maximum of 2 A with an input voltage of 3.7 V to 4.2 V. This means you must not connect its pins directly to a 5 V Arduino! It doesn't even run on 3.3 V.

The solution is either to use a regulator or just have the SIM800L draw from a Li-Po (cellphone) battery. 

Antennas are essential for this kind of module especially if your project is indoors. Without an antenna, there would not be enough transmitting power for the SIM800L to perform GSM services such as calls and SMS. CityTech BD 

Smallest-font-b-SIM800L-b-font-GPRS-GSM-

Interfacing with Arduino :

Arduino SIM800L Connection

General Specification
IC ChipSIM800L
Operating Voltage (VDC)3.7 ~ 4.2
Peak Current (A)2
Shipment Weight0.01 kg
Shipment Dimensions9 × 6 × 3 cm

Documentation :

  1. Send Receive SMS & Call with SIM800L GSM Module & Arduino (LastMinuteEngineers)
  2. Github Link

CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD CityTech BD 

Package Includes :

1 x SIM800L Mini GPRS GSM Module

1 x PCB Antenna.

Review

Write a review

Note: HTML is not translated!
Bad Good