Menu
Your Cart

ADJUSTABLE STEP-UP / STEP-DOWN VOLTAGE REGULATOR LM2577 + LM2596

Description

ADJUSTABLE STEP-UP / STEP-DOWN VOLTAGE REGULATOR LM2577 + LM2596 in Bangladesh.

This board contains LM2577S and LM2596 voltage regulator ICs and this is a buck-boost voltage converter that you can set the output voltage via the trimpot on the board. You can both increase or reduce the input voltage as output. The regulator can pass through current up to 4A on itself. CityTechBD 

The board's input voltage can be between 4V and 35V; it's output voltage can be adjusted between 1.25V and 25V.

One of the regulators on the board is a step-down converter and the other is step-up converter. You can set the output voltage through the trimpot, after giving an input. If you want the voltage is reduced, the step-down converter steps in to reduce input. In the other case, step-up converter steps in. In addition there are 2 more trimpots on the board. One for limiting the output current and the other for revolving light current. Besides it is being used as DC-DC voltage regulator, it is also used as a LED driver or a solar regulator. CityTechBD 

Specification:

  • Input Voltage :4-35V
  • Output voltage: Continuously adjustable(1.25-25V unload adjust)
  • Output current: 3A Max(If more than 15W, please install the heat sink)
  • CC range :0-2A (adjustable)
  • Revolving light current: CC value * (1%-100%), default is 0.1 times
  • Minimum voltage difference: 2V
  • Output power: natural cooling 15W CityTechBD 
  • Conversion efficiency: 80% (the higher the output voltage, the higher the efficiency)
  • Operating Temperature: Industrial (-40C to +85C) (ambient temperature more than 40C, lower power use, or add heat sink)
  • Full load temperature rise: 45 ℃
  • Indicator: CC indicator is Red, charging indicator is Red, charging completed the indicator is Blue.
  • Output short circuit protection: Yes, constant current.
  • Connect method: Can solder on the PCB with wire directly
  • Input: IN+ input Positive is, IN- input negative
  • Output: OUT+ output is positive, OUT- output negative
  • Module Size: 50 x 37 x 13mm. CityTechBD 

Note: 

  • This module power output is affect by the module itself-capacity and pre-and post-class load and other factors; the following data for professional equipment measured results, without considering other factors.
  • Power supply module is a kind of electronic components, please don’t buy the item if you have no electronic expertise.
  • This Module Properties: It is non-isolated step-down constant current, constant voltage module (CC CV) charging module CityTechBD 

Package Includes:

1x Adjustable Step-Up / Step-Down Voltage Regulator LM2577 + LM2596 CityTechBD 

Review

Write a review

Note: HTML is not translated!
Bad Good