Specification
Robotics Parts | |
Length (mm) | 68.6 mm |
Operating Voltage (VDC) | 5V |
Weight(gm) | 25 g |
Width (mm) | 53.4 mm |
Description
Arduino Uno R3 without Cable in Bangladesh
The Uno is a microcontroller board based on the ATmega328.
The board is equipped with 14-pin digital input / output (6 of which can be used as PWM signals), 6 analog inputs, a 16MHz quartz, a USB connector, a power jack, a connector for the ICSP programming and a small button to reset the card; also provides all that is necessary to support the operation of the microcontroller.
To start using the Arduino UNO is simply necessary to connect the card to a PC via a USB cable, or power the board from an AC-to-DC adapter or through a simple battery.
The Arduino Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial chip; Arduino UNO R3 board in fact implements the ATmega16U2 chip (which replaces the chip Atmega8U2 of previous reviews) planned just to be a USB-to-serial converter. CityTech BD
The Arduino UNO will be one of the future versions of the Arduino reference cards. The Uno is the latest in a series of USB Arduino boards, and is a reference model for the Arduino platform, CityTech BD