High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC three wire / connector type.
Shape: shield, M8.
Detection range: 1.5mm.
Output configuration: PNP.
Action mode: NO. V520-R221FH type: bar code reader; face up to,
CityTech BD Ultra small CCD type
The fastest sorting speed of 500 scans per secondConnection method: Pre-wired connector OMRON E2E-X2MF1-Z 2M
E2E-X2MF1-Z 2MCable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications OMRON E2E-X2MF1-Z 2M.
Long-distance model for up to 1,000 mm.Detection methods: the firing pattern.
Detection range: 1m.
Purpose: small,
Small thin space probe;
Interference prevention function with close installationSize: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 27 (43).
Output configuration: PNP OMRON E2E-X2MF1-Z 2M.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Sensing method: Through-beam type (with slot).
CityTech BD Sensing distance: 3.6 mm (slot width).
Output type: NPN output.
Output configuration: Dark-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration E2E-X2MF1-Z 2M.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Appearance: Unshielded.
Sensing distance: 3 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Standard Flat Seensors in E2E-X2MF1-Z 2M.
Many Different Variations.
Only 6 mm thick yet provides a sensing,
distance of 3 mm (TL-W3MC1).
Aluminum die-cast models also available.
CityTech BD